Steel Products
Hot Rolled Coils
Workhorse hot-rolled coil for tubes, cylinders and fabrication.
Overview
Material overview
High grade carbon versions are specifically used to overcome fatigue and wear. Grades include HSLA, Corten, structural, commercial and pressure vessel qualities.
Hot rolled coils are malleable and suited to industrial applications, with the characteristic blue-grey appearance and rough feel from the rolling process.
Range
Grades we deal in
IS 1079
IS 10748
IS 2062 E250
E350 A/BR/BO & C
E410 A/BR/BO & C
E450 A/BR/C/CU
Low carbon (C: 0.04–0.29%)
Medium carbon (C: 0.29–0.60%)
High carbon (C: 0.60–2.0%)
Technical data
Specifications & typical properties
Indicative values from our reference catalog — exact grades and dimensions are confirmed against mill test certificates at quotation.
| Standards | IS 10748, IS 11513, IS 1079, IS 2062 |
|---|---|
| Thickness | 1.2mm – 25mm |
| Width | 900mm – 2500mm |
| Length | Cut to sheets per requirement |
Chemical composition (max %)
| Grade | C | Mn | P | S |
|---|---|---|---|---|
| IS 10748 | 0.1 | 0.5 | 0.05 | 0.05 |
| IS 1079 | 0.15 | 0.6 | 0.055 | 0.055 |
Mechanical properties
| Grade | Yield (MPa min) | Tensile (MPa) | Elongation min (%) |
|---|---|---|---|
| IS 10748 | 170 | 290 min | 30 |
| IS 1079 | — | 240–400 | 28 |
Where it works
Applications
Oil, gas and water pipelines
LPG cylinders
Pressure vessel tanks
Chequered plate for anti-slip floors
Commercial steel for tubes and general fabrication
Structural steel for construction & electrical industry