Steel Products
MS Structure & High Tensile Structure
E250/E350 angles, channels, beams and flats for fabrication.
Overview
Material overview
The letter 'E' stands for Engineering Steel, and the numbers (250, 350) represent the minimum yield strength in MPa.
Available in plates, flats, beams, angles and channels — including ISMC, ISMB, UC, NPB and WPB profiles — with controlled chemical composition for good weldability and consistent mechanical properties.
Range
Grades we deal in
E250
E350
Angle
Channel (ISMC)
UC (Universal Column)
Beam (ISMB)
NPB (Narrow Parallel Flange Beam)
WPB (Wide Parallel Flange Beam)
Flats (Pata Patti)
Technical data
Specifications & typical properties
Indicative values from our reference catalog — exact grades and dimensions are confirmed against mill test certificates at quotation.
| Form | Angles, beams, channels, flats, plates |
|---|---|
| Tolerances | As per IS 1852 / IS 2062 / EN 10029 |
| Length | 6000mm – 12000mm |
| Surface condition | Hot rolled, pickled, or shot blasted & primer coated |
Chemical composition — IS 2062 (max %)
| Grade | C | Mn | Si | S | P |
|---|---|---|---|---|---|
| E250BR | 0.22 | 1.5 | 0.4 | 0.04 | 0.04 |
| E350BR | 0.23 | 1.5 | 0.4 | 0.04 | 0.04 |
Mechanical properties — IS 2062
| Grade | Yield (MPa min) | Tensile (MPa min) | Elongation (%) |
|---|---|---|---|
| E250BR | 250 | 410 | 23 |
| E350BR | 350 | 490 | 22 |
Where it works
Applications
Fabrication
Bridge structures
Shipbuilding and ship hulls
Industrial sheds
Heavy duty structures
Border fencing
Machinery equipment